Electrolux / Frigidaire Washer E11 Error Code

If your Electrolux / Frigidaire washer is displaying E11, this guide explains what it means,
what you can safely check, and when professional diagnosis may be needed.

What does E11 mean on a Electrolux / Frigidaire washer?

Difficulty filling with water during the wash phase.

Definitions can vary by model or platform, so compare the code with information for your exact model before replacing parts.

What you can try

Make sure the water faucets are open, water pressure is adequate, inlet hoses are not kinked, and the drain hose is installed correctly.

Before booking a repair

1. Confirm the displayed error code and your appliance model number.
2. Check relevant external issues such as a blocked filter, kinked hose, open door, interrupted power, or restricted airflow.
3. If a power reset is appropriate for the appliance, turn it off safely and restart it once.
4. If the code returns, avoid repeated resets and arrange diagnosis.

Safety note

Disconnect electrical power before accessing internal components.
Do not open sealed, gas, high-voltage, or refrigerant systems unless qualified to service them.
These steps are general guidance and do not replace service information for your exact model.

Still seeing E11?

If the problem persists, contact Appliance Maestro to diagnose and repair your washer.

Contact Us

When should you call a technician?

If the E11 code returns after the safe checks above, or the appliance is leaking, overheating,
tripping a breaker, making unusual noises, or not operating correctly, professional diagnosis is recommended.
Appliance Maestro provides appliance repair service in Ottawa and surrounding communities.

Related Electrolux / Frigidaire washer error codes

Electrolux / Frigidaire Washer E13Electrolux / Frigidaire Washer E21Electrolux / Frigidaire Washer E23Electrolux / Frigidaire Washer E35Electrolux / Frigidaire Washer E41Electrolux / Frigidaire Washer E42