GE Dryer 353 Error Code

If your GE dryer is displaying 353, this guide explains what it means,
what you can safely check, and when professional diagnosis may be needed.

What does 353 mean on a GE dryer?

Lint filter is clogged, often with fabric-softener residue.

Definitions can vary by model or platform, so compare the code with information for your exact model before replacing parts.

What you can try

Separate and rinse the foam filter and clean the plastic mesh screen with water and a soft brush, reinstall, then run a wash-and-dry cycle.

Before booking a repair

1. Confirm the displayed error code and your appliance model number.
2. Check relevant external issues such as a blocked filter, kinked hose, open door, interrupted power, or restricted airflow.
3. If a power reset is appropriate for the appliance, turn it off safely and restart it once.
4. If the code returns, avoid repeated resets and arrange diagnosis.

Safety note

Disconnect electrical power before accessing internal components.
Do not open sealed, gas, high-voltage, or refrigerant systems unless qualified to service them.
These steps are general guidance and do not replace service information for your exact model.

Still seeing 353?

If the problem persists, contact Appliance Maestro to diagnose and repair your GE dryer.

Contact Us

When should you call a technician?

If the 353 code returns after the safe checks above, or the appliance is leaking, overheating,
tripping a breaker, making unusual noises, or not operating correctly, professional diagnosis is recommended.
Appliance Maestro provides appliance repair service in Ottawa and surrounding communities.

Related GE dryer error codes

GE Dryer Long dry timeGE Dryer Dryer will not startGE Electric Dryer Runs but does not heatGE Dryer 18GE Dryer Spin light blinkingGE Gas Dryer Runs but does not heat